the chassis

Think the layout has to be quarish....

transformers at the back

it would be good to have the selector switch on top at the rear!

never seen that done before but it would be the ideal place

short wires from all the cinch to the switch, then only one to the front to the volume.

still waiting for a couple of components

but most of it is done.

looks good

should look something like this i guess.....

eeeehmmm

no.

tooooo loooong

I'm sure Nick hopes it will be raining all weekend!!

I got most of the components.

Nick's Amp

Nick's my nephew

He's (only) 16 year old and NEEDS a tube amp.

With 5 audio imputs, no less

And a headphone out too

There you have it.

So I'm building him one.

All the parts are there

More or less.

Antoine will design and make the box.

I'm doing the gutts and the chassis.

One thing's for sure.

Nobody has an amp like this one.

Here's the diagram

The volume will go up to 11!!!!

Yes.

Started with designing the PCB's

Very flexible set up

It can do Nick's amp

And a SE triode

And a OTL headphone amp

And a pre-amp for HUGE tubes

The power supply can be tube or diode rectified.

Diodes for Nick's one.

Pretty small, the PCB's

Can yoi imangine the amount of gold on these Cinches???

Elma selector switch

And ALP volume, all the way up to 11!!!

Cool transformer too.

High Voltage

Don't ever touch it!!!

Of course Nick's going to tell all his friends

So their fathers will buy amps too!

Idea:

The front of the box will be stainless steel

brushed

and behind the plexi glass, huge, volume knob......

you can see the numbers.

1 to 11 (10's for pussies)

etched with pure oxygen into the stainless steel.

That WILL be cool!